Get to the frame faster.
Developed to help builders lay the sub-floor faster and with more accuracy, Egger OS’Floor is a strong, light weight and moisture resistant flooring product. With full H2 treatment as standard, Egger OS’Floor also provides termite resistance to match your Hyne T2 Blue and T2 Red house framing. This alternative to particle board sub-floors will give you and your clients cost-effective peace of mind for a critical part of the house.
- • A pre-marked nailing grid shortens install time and improves accuracy.
- • Lightweight product for safe and efficient installation.
- • Moisture resistant sealed tongue and groove edges ensure stability.
- • Full H2 treatment as standard for termite resistance Australia wide.
Egger OS'Floor is sheeting designed to be installed over a conventional joist and bearer system that provides adequate ventilation underneath.
Can be installed with common fixing methods. Refer to the installation guide available below.
Egger OS'Floor can be used as a traditional sub-floor and can also be sanded then coated with clear and tinted applications for a finished floor. Refer to the installation guide and your floor coating professional for more advice.
For further Technical Information click on the link below
You’re welcome to contact us for further information about Egger OS'Floor or the Hyne Timber range, simply call Hyne Product Info Service on 1300 304 963 or email firstname.lastname@example.org