Where to Use

Hyne Timber Beam 17 is suitable for indoor and outdoor, above ground applications in Australia.

The renowned natural strength of timber is enhanced with our glue laminating process, ensuring Beam 17 is comparatively lightweight and ideal for long span / high load applications. Beam 17 is ideal for lintels over large window and door openings, garage openings or roof beams where spans over large spaces are dictated by design.

Readily available in a range of the most commonly specified sizes and lengths, Beam 17 is versatile and more practical to install than steel.

Tropic of Capricorn
Properties

Sustainably sourced pine

Fungal resistant product*

Termite resistant product**

Product of Australia

Grades

Beam 17 is available in two finish grades as per AS 1328.1 – 1998:

Select Grade A (SEL)
Structural Grade C (STR)

SELECT GRADE A (SEL)

Intended for use in applications where appearance is important and clear or painted finishes are used. All surface voids are therefore filled or repaired. Unless otherwise specified, the surfaces are sanded to a minimum 60 grit finish.

STRUCTURAL GRADE C (STR)

Intended for use in applications where appearance is not important. All natural blemishes and voids are acceptable.

Nominal Sizes

65MM THICKNESS

130 x 65
165 x 65
195 x 65
230 x 65
260 x 65
295 x 65
330 x 65
360 x 65
395 x 65
425 x 65
460 x 65
495 x 65

85MM THICKNESS

130 x 85
165 x 85
195 x 85
230 x 85
260 x 85
295 x 85
330 x 85
360 x 85
395 x 85
425 x 85
460 x 85
495 x 85
525 x 85
560 x 85
590 x 85

130MM THICKNESS

130 x 130
165 x 130
195 x 130
230 x 130
260 x 130
295 x 130
330 x 130
360 x 130
395 x 130
425 x 130
460 x 130
495 x 130
525 x 130
560 x 130
590 x 130

Lengths

2.4m to 16.8m (in 0.3m increments)
 

Profile

Straight (made to order)

Cambered to 600m radius

Curved - down to 1.5m radius (made to order)

Applications

Internal and external*

Above ground applications only

Lintels

Bearers

Beams

Rafters

Columns / Blades

Portal Frames

Durability

Durability Class 4 (Above Ground) Timber Species

*Available H3 treated for external, above ground applications

**Available H2 treated for internal, above ground applications

Available untreated for internal, above ground applications

Standards

MANUFACTURING STANDARDS

AS/NZS 1328.1 – 1998 Glued laminated structural timber Part 1: Performance requirements and minimum production requirements.

AS 5068 – 2006 Timber - Finger joints in structural products - Production requirements

DESIGN STANDARDS

AS1720.1-2010 – Timber structures Part 1: Design methods.

S MARK CERTIFIED

S Mark logo

Species

Pinus Elliottii

Pinus Caribaea

Hybrids of Pinus Elliottii and Pinus Caribaea

Pinus Radiata

Technical Data Sheets
Refer to Hyne Timber Technical Data Sheets (TDS) 5, 6, 8 and 9 for storage, installation and maintenance advice.
read more
Brochure Download
Download the LGL / Beam 17 product brochure here:
Download
FAQ's Download
Still got questions? Have a look at our FAQ's sheet here:
Download