Where to Use

Hyne Timber Beam 18 is suitable for indoor, above ground applications in Australia.

Architects, Building Designers and Structural Engineers can specify Beam 18 in indoor, above ground structural applications - leveraging the beautiful, consistent colour tone that Victorian Ash can provide.

Beam 18 is produced from sustainable, Responsible Wood and PEFC certified resources to ensure our environment is protected for future generations.

Tropic of Capricorn
Properties

Structural solution

Indoor, above ground only

Safe to handle and work with

Product of Australia

Grades

Beam 18 is available in two finish grades as per AS 1328.1 – 1998:

Select Grade A (SEL)
Structural Grade C (STR)

SELECT GRADE A (SEL)

Intended for use in applications where appearance is important and clear or painted finishes are used. All surface voids are therefore filled or repaired. Unless otherwise specified, the surfaces are sanded to a minimum 60 grit finish.

STRUCTURAL GRADE C (STR)

Intended for use in applications where appearance is not important. All natural blemishes and voids are acceptable.

Nominal Sizes

65MM THICKNESS

120 x 65
155 x 65
185 x 65
215 x 65
240 x 65
270 x 65
300 x 65
330 x 65
360 x 65
390 x 65
420 x 65

85MM THICKNESS

120 x 85
155 x 85
185 x 85
215 x 85
240 x 85
270 x 85
300 x 85
330 x 85
360 x 85
390 x 85
420 x 85
450 x 85
480 x 85
510 x 85
540 x 85
570 x 85
600 x 85

130MM THICKNESS

120 x 130
155 x 130
185 x 130
215 x 130
240 x 130
270 x 130
300 x 130
330 x 130
360 x 130
390 x 130
420 x 130
450 x 130
480 x 130
510 x 130
540 x 130
570 x 130
600 x 130

Lengths

2.4m to 16.8m (in 0.3m increments)
 

Profile

Straight

Cambered to 600m radius

Curved - down to 5m radius

Applications

Internal only

Above ground applications only

Lintels

Bearers

Beams

Rafters

Columns / Blades

Portal Frames

Durability

Durability Class 4 (Above Ground) Timber Species

Available untreated for internal, above ground applications only

Standards

MANUFACTURING STANDARDS

AS/NZS 1328.1 – 1998 Glued laminated structural timber Part 1: Performance requirements and minimum production requirements.

AS 5068 – 2006 Timber - Finger joints in structural products - Production requirements

DESIGN STANDARDS

AS1720.1-2010 – Timber structures Part 1: Design methods.

S MARK CERTIFIED

S Mark logo

Species

Victorian Ash

Technical Data Sheets
Refer to Hyne Timber Technical Data Sheets (TDS) 5, 6, 8 and 9 for storage, installation and maintenance advice.
read more
Brochure Download
Download our glue laminated timber product brochure here:
Download
FAQ's Download
Still got questions? Have a look at our FAQ's sheet here:
Download